As the popularity of the EOTech XPS has grown, a week doesn’t go by that we do not get inquiries about providing an Accucam QD System for it as well as a means to protect the lenses of this expensive optic. With all of the inquires coming in, we moved this project to the top of our development and field test list and are pleased to now offer these two accessories for the EOTech XPS Series Scopes to you. The new Accucam QD System For The EOTech XPS Series is a scaled down version of the Accucam QD System (NSN:1240-99-696-3341) we provide the civilian, law enforcement and military for the EOTech 551 and 552. The patented Accucam QD Mounting System is still the only QD Lever System available today that does not add height to the EOTech optic. That’s because this unique and innovative quick detach system retrofits directly to the body of the XPS. The Accucam QD Locking Lever System For The XPS replaces the EOTech socket head screw or thumbnut attachment method. No other modifications are required. The Accucam system installs in approximately ten minutes. The only tools required are a 7/64" allen wrench and a torx head wrench which are both included in the kit. Weighing only two ounces, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out of spec. Once the Accucam is installed on the XPS, the sight can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. In tests, the EOTech Accucam Locking Lever System has shown to be repeatable to less than 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag-proof.