View CartMy Account / Order StatusHelp






(Your shopping cart is empty)
You are here: Home > Uppers, Barrels, Gas Blocks, Flash Supressors, Parts > Uppers (Receivers, Complete)
Sort By:
Page of 1
Complete 300 AAC BLACKOUT Upper Receiver Assembly 16"
Advanced Armament Complete 300 AAC BLACKOUT Upper Receiver Assembly, 16" Barrel
Our Price: $1,120.50
Sale Price: $949.95
1 in stock!
(1)

Advanced Armament Complete 300 AAC BLACKOUT Upper Receiver Assembly

- 16" Nitrided 1/7 Twist Barrel, threaded 5/8-24
- AAC 51T BLACKOUT™ Flash Hider
- "Full Auto" Chrome Bolt Carrier
- KAC URX 3.1 Rail
- Ready to drop onto your AR15/M16/M4 lower! Works with an AR lower with "Mil-Spec" push pin locations.

IMPORTANT NOTES:

-The 16" AAC 300BLK Upper is designed for use with a carbine receiver extension, standard GI Buffer Spring, and a CARBINE Buffer.
Complete 300 AAC BLACKOUT Upper Receiver Assembly 9"
Advanced Armament Complete 300 AAC BLACKOUT Upper Receiver Assembly, 9" Barrel
Our Price: $1,120.50
Sale Price: $1,095.00
(Out of Stock)
(2)

*Note, rail covers are sold separately.

Complete Advanced Armament 300 AAC BLACKOUT Upper Receiver Assembly

- 9" Nitrided 1:8: Twist Barrel, threaded 5/8-24
- AAC 51T BLACKOUT™ Flash Hider
- "Full Auto" BCG
- KAC URX Rail
- Ready to drop onto your AR15/M16/M4 lower! Works with an AR lower with "Mil-Spec" push pin locations.

IMPORTANT NOTES:
-The 9" AAC 300BLK Uppers are designed for use with a carbine receiver extension, standard GI Buffer Spring, and an H2 Buffer.

*With barrels shorter than 16", all NFA rules apply!

Specifications subject to change.
Daniel Defense M4 URG, MK18 With 10.3 in. Barrel, Dark Earth RIS II
Daniel Defense M4 URG, MK18 With 10.3 in. Barrel, Dark Earth RIS II
Our Price: $1,149.00
(Out of Stock)
(3)

The Daniel Defense M4 URG, MK18 comes complete with bolt carrier group and charging handle, 10.3″ Cold Hammer Forged Barrel, RIS II MK18 Rail System, and Daniel Defense low profile gas block.
Daniel Defense M4 16" URG, V7 With MFR Handguard
Daniel Defense M4 16" URG, V7 With MFR Handguard
List Price: $949.00
Our Price: $949.00
(Out of Stock)

The Daniel Defense V7 Upper Receiver Group is built off the extremely popular V5 platform. We incorporated the new Modular Float Rail 12.0 to provide each shooter with the ultimate in modular adaptability. Should the shooter desire, the tube can be run “slick” with an uninterrupted top rail that runs the length of the tube. In addition, the installation of Modular Picatinny Rail sections is accomplished with little effort. This allows the shooter to customize the rail set up.
Daniel Defense M4 16" URG, V7 Lightweight With MFR Handguard
Daniel Defense M4 16" URG, V7 Lightweight With MFR Handguard
List Price: $949.00
Our Price: $949.00
(Out of Stock)

The Daniel Defense V7 Lightweight Upper Receiver Group is built off the extremely popular V5 platform. We incorporated the new Modular Float Rail 12.0 to provide each shooter with the ultimate in modular adaptability. Should the shooter desire, the tube can be run “slick” with an uninterrupted top rail that runs the length of the tube. In addition, the installation of Modular Picatinny Rail sections is accomplished with little effort. This allows the shooter to customize the rail set up.
Daniel Defense M4 16" URG, V5 With Omega X 12.0 Rail
Daniel Defense M4 16" URG, V5 With Omega X 12.0 Rail
List Price: $1,079.00
Our Price: $1,079.00
(Out of Stock)

The Daniel Defense M4 URG, V5 is perfectly adapted for end-users who plan on attaching the ever popular red dot, holographic or magnified optics to their firearm. The slick top monolithic upper receiver provides operators with valuable top rail real estate for accessories that fit their shooting needs.
Daniel Defense M4 16" URG, V5 Lightweight With Omega X 12.0 Rail
Daniel Defense M4 16" URG, V5 Lightweight With Omega X 12.0 Rail
Our Price: $1,079.00
Sale Price: $899.95
3 in stock!
(2)

The Daniel Defense M4 URG, V5 LW is perfectly adapted for end-users who plan on attaching the ever popular red dot, holographic or magnified optics to their firearm.
Daniel Defense M4 URG, V1 Lightweight With Omega X Rail 12.0 FSP
Daniel Defense M4 URG, V1 Lightweight With Omega X Rail 12.0 FSP
List Price: $1,199.00
Our Price: $1,199.00
(Out of Stock)

Daniel Defense manufactures the highest quality complete M4 upper receivers on the market today! Every Daniel Defense upper is painstakingly hand assembled, quality assurance tested, and test fired to ensure that the highest quality product makes it to the hands of our customers.
Daniel Defense M4 URG, MK18 With 10.3 in. Barrel, RIS II, Black
Daniel Defense M4 URG, MK18 With 10.3 in. Barrel, RIS II, Black
Our Price: $1,149.00
(Out of Stock)
(1)

The Daniel Defense M4 URG, MK18 comes complete with bolt carrier group and charging handle, 10.3″ Cold Hammer Forged Barrel, RIS II MK18 Rail System, and Daniel Defense low profile gas block.
Daniel Defense M4 URG, V3 Mid-Length With DDM4 9.0 Rail
Daniel Defense M4 URG, V3 Mid-Length With DDM4 9.0 Rail
List Price: $1,199.00
Our Price: $1,199.00
1 in stock!

The Daniel Defense DDM4v3 upper receiver group come complete with bolt carrier group and charging handle, 16″ Cold Hammer Forged Barrel, A1.5 Fixed Rear Sight, DDM4 Rail™ 9.0, and Daniel Defense Vertical Grip.
KAC-Knight's Armament SR-15 E3 CQB SBR Upper Receiver Assy
KAC-Knight's Armament SR-15 E3 CQB SBR Upper Receiver Assy
Our Price: $1,750.00
Sale Price: $1,599.00
(Out of Stock)
(3)

Knight's Armament SR-15 E3 CQB SBR Upper Receiver Assy.

Revamped for 2014 is the Knight's Armament SR-15 E3 CQB SBR. This complete upper assembly is the version with an 11.5" barrel, and Knight's Armament mid-length URX 3.1. The URX 3.1 featured 5 anti-rotation QD sling swivel sockets and a removable bottom rail for cleaning. A 4 piece rail cover kit is included, there are 3 flat panels and 1 with a build in hand stop. The barrel is fitted with an A2 flash hider and pinned low profile gas block with a carbine length gas system. Atop the URX 3.1 is the Knight's Armament micro front sight (elevation adjustable). At the rear is the Knight's Armament 200-600m micro rear sight that is flip up and adjustable for windage and elevation. The upper receiver has the recoil slots "T" numbered and is engraved with the KAC shield. An LMT charging handle with tactical latch is included. The E3 bolt includes rounded locking lugs for extreme durability and is mated to the E3 barrel extension. The KAC CQB SBR will work with any standard SR-15 or AR-15 lower receiver once the included Knight's Armament HH buffer is installed. All NFA rules apply!
KAC-Knight's Armament SR-15E3 LPR Upper Receiver Assy.
Our Price: $1,750.00
Sale Price: $1,699.95
1 in stock!
(1)

Knight's Armament Co. SR-15 LPR (Light Precision Rifle) Upper Receiver Assy., sub-moa accurate
Complete upper features:
Heavy 18" barrel
KAC URX 3.1 handguard with bolt on panel kit included
KAC Micro front flip up sight
KAC Micro 200-600m rear flip up sight
M16 Bolt carrier
KAC enhanced E3 rounded bolt
A2 flash suppressor
LMT Charging handle with tactical latch

Weight of complete upper without panels: 5 lb. 13 oz.
KAC-Knight's Armament SR-15E3 IWS Mod1 Upper Receiver Assembly
List Price: $1,500.00
Our Price: $1,470.00
Sale Price: $1,425.00
3 in stock!
(12)

KAC Knights Armament Mod 1 Upper Receiver Assembly Includes:

16 Inch Barrel With Pinned On Gas Block
200-600m Knight's Armament Micro Rear Sight
Knight's Armament Micro Front Sight
E3 Enhanced Bolt
M16 Full Auto Bolt Carrier, Chrome Lined
A2 Flash Hider
KAC URX 3.1 Hand Guard with Bolt On Rail Covers/Hand Stop
LMT Charging Handle With LMT Tactical Latch
LMT-LEWIS MACHINE 14.5 IN COMPLETE UPPER RECEIVER
LMT-Lewis Machine & Tool 14.5" Upper Receiver Assembly With Flash Suppressor
Our Price: $538.35
1 in stock!
(1)

LMT-LEWIS MACHINE & TOOL 14.5" UPPER RECEIVER ASSEMBLY T Numbered Flat top upper receiver Chrome lined barrel 5.56 chamber 1:7 twist A2 flash suppressor M203 barrel cut Includes everything except handguards, bolt group and charging handle.

ALL NFA RULES APPLY!
LMT-LEWIS MACHINE TOOL RIFLE MRP MONOLITHIC RAIL
LMT-Lewis Machine & Tool Standard MRP (Rifle) Version
Our Price: $1,394.05
2 in stock!

Product description coming soon!

ALL NFA RULES APPLY for all barrels shorter than 16 inches!
LMT-LEWIS MACHINE TOOL CARBINE MRP MONOLITHIC RAIL
LMT-Lewis Machine & Tool CQB (Close Quarter Battle) MRP (Carbine) Version
Our Price: $1,177.75
2 in stock!

Product description coming soon!

ALL NFA RULES APPLY for all barrels shorter than 16 inches!
LMT-LEWIS MACHINE TOOL 16 INCH AR15 UPPER RECEIVER
LMT-Lewis Machine & Tool 16" Upper Receiver Assembly W/Flash Suppressor
Our Price: $538.35
(Out of Stock)
(2)

Back-To-School sale pricing going on right now.

LMT-LEWIS MACHINE & TOOL 16" UPPER RECEIVER ASSEMBLY

  • T Numbered Flat top upper receiver
  • Chrome lined barrel
  • 5.56 chamber
  • 1:7 twist
  • A2 flash suppressor
  • M203 barrel cut

Includes everything except handguards, bolt carrier group and charging handle.
LMT-LEWIS MACHINE 10.5 INCH AR-15 UPPER RECEIVER
LMT-Lewis Machine & Tool 10.5" Upper Receiver Assembly With Flash Suppressor
Our Price: $538.35
(Out of Stock)
(3)

LMT-LEWIS MACHINE & TOOL 10.5" UPPER RECEIVER ASSEMBLY T Numbered Flat top upper receiver Chrome lined barrel 5.56 chamber 1:7 twist A2 flash suppressor Includes everything except handguards, bolt group and charging handle.

ALL NFA RULES APPLY!
LMT-LEWIS MACHINE & TOOL 16" CQB MRP PISTON UPPER RECEIVER ASSEMBLY
LMT-Lewis Machine & Tool 16" CQB MRP Piston Upper Receiver Assembly
Our Price: $1,558.34
(Out of Stock)
(1)

Comes with LMT CQB upper receiver, 16 inch chrome lined barrel, piston bolt carrier group, charging handle, three TangoDown rail covers, torque wrench, and L7S1-Kit
Noveske 10.5" CQB Q/MUR & 9" LO-PRO RAIL
Noveske 10.5" CQB Q/MUR & 9" LO-PRO RAIL
List Price: $1,450.00
Our Price: $1,377.50
(Out of Stock)

10.5" CQB 5.56mm Stainless Barrel
--1 in 7" twist polygonal rifling
--Extended Feed Ramps
--Beadblasted finish on barrel
--Carbine length gas system
--1/2x28 threads
--Low-profile gas block pinned to barrel
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--9" free floated handguard w/ 1913 rails
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Gun Fighter Charging Handle
--KX3 flash suppressor,(US pat #7,836,809)
Upper Weight: 4 1/2 lbs
Noveske 12.5" Crusader W/MUR & 9" Lo-Pro Rail
Noveske 12.5" Crusader Upper W/MUR & 9" LO-PRO RAIL
List Price: $1,450.00
Our Price: $1,377.50
1 in stock!

Featuring:
--12.5" CQB stainless barrel, 1 in 7" twist
--Vltor MUR upper receiver
--5.56 Noveske Match Mod 0 chamber
--9" railed handguard with anti-rotation interface with the MUR upper receiver
--Carbine length gas system
--Extended feed ramps
--1/2x28 TPI muzzle threads, 5.56mm
--Bead blasted finish on barrel
--Auto bolt carrier
--Shot peened and MP tested bolt
--Vltor/BCM Medium Latch charging handle
--Medium Weight Contour

4 lbs, 7.9 oz

All NFA Regulations apply. Please check your local and state laws before ordering.
Contact your local ATF Field Office with any NFA questions you may have.

This is a complete upper, test fired, and ready to be installed on your complete lower.
Noveske 12.5" Crusader W/MUR & NSR-9"
Noveske 12.5" Crusader Upper W/MUR & NSR-9" Keymod Handguard
List Price: $1,282.50
Our Price: $1,218.38
(Out of Stock)

12.5" CQB 5.56mm Stainless Barrel
--1 in 7" twist polygonal rifling
--Extended Feed Ramps
--Beadblasted finish on barrel
--Carbine length gas system
--1/2x28 threads
--Low-profile gas block pinned to barrel
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--NSR-9 free floated handguard w/1913 top rail
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Gun Fighter Charging Handle
--KX3 flash suppressor,(US pat #7,836,809)
Upper Weight: 4lbs.
Noveske 12.5" Crusader SwitchBlock Upper Rceiver W/9.5" SB RAIL
Noveske 12.5" Crusader SwitchBlock Upper Rceiver W/9.5" SB RAIL
List Price: $1,685.00
Our Price: $1,600.75
(Out of Stock)

Noveske 12.5" Crusader SwitchBlock Upper Rceiver W/9.5" SB RAIL

   Noveske 12.5" Crusader 5.56mm Stainless Barrel, 1 in 7" twist polygonal rifling
   Vltor MUR Upper Receiver with Extended Feed Ramps
   Beadblasted finish on barrel
   Carbine length gas system
   1/2x28 threads
   Switchblock,(US pat #7,856,917), pinned to barrel
   9.5" free floated SB handguard w/ 1913 rails
   Shot peened and MP tested bolt
   Auto carrier with properly staked carrier key
   BCM Gun Fighter Charging Handle
   AAC Blackout 51T flash suppressor

NFA Rules apply, can only be used as a pistol upper or registered short barreled rifle
Noveske 14.5" Afghan W/MUR & 11" LO-PRO RAIL
Noveske 14.5" Afghan W/MUR & 11" LO-PRO RAIL
List Price: $1,491.53
Our Price: $1,416.95
(Out of Stock)

14.5" CQB 5.56mm Stainless Barrel
--1 in 7" twist polygonal rifling
--Extended Feed Ramps
--Beadblasted finish on barrel
--Carbine length gas system
--1/2x28 threads
--Low-profile gas block pinned to barrel
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--11" free floated handguard w/ 1913 rails
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Gun Fighter Charging Handle --Pinned and welded AAC flash hider
Upper Weight: 4 1/4 lbs
Noveske 14.5" Afghan W/MUR & 11" NSR RAIL
Noveske 14.5" Afghan W/MUR & 11" NSR RAIL
List Price: $1,324.57
Our Price: $1,258.34
(Out of Stock)

14.5" CQB 5.56mm Stainless Barrel
--1 in 7" twist polygonal rifling
--Extended Feed Ramps
--Beadblasted finish on barrel
--Carbine length gas system
--1/2x28 threads
--Low-profile gas block pinned to barrel
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--11" free floated NSR keymod handguard w/ 1913 top rail
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Gun Fighter Charging Handle --Pinned and welded AAC flash hider
Upper Weight: 4 1/2 lbs
Noveske 14.5" Afghan SWITCHBLOCK W/11.5" SB RAIL, Gen III
Noveske 14.5" Afghan SWITCHBLOCK W/11.5" SB RAIL, Gen III
List Price: $1,795.00
Our Price: $1,705.25
(Out of Stock)

Barrel

Length- 14.5” Stainless w/ 1/7 Polygonal Twist

Switchblock (US pat# 7,856,917), pinned to barrel

Barrel Extension w/extended feed ramps

AAC 51T Blackout 1/2 x 28

Mid Length Gas System

Upper Receiver

Model- Gen III precision machined receiver w/extended feed ramps

Finish- Cerakote (Black)

Charging Handle- Gun Fighter

Shot peened & MP tested bolt

Auto carrier w/staked carrier key

Handguard

11.5” Noveske split rail w/1913 rails

Noveske 10.5" CQB Complete AR-15 Upper Receiver Gen III w/NSR-9
Noveske 10.5" CQB Complete AR-15 Upper Receiver Gen III w/NSR-9
List Price: $1,325.00
Our Price: $1,258.75
1 in stock!

10.5" CQB 5.56mm Stainless Barrel
--1 in 7" twist polygonal rifling
--Extended Feed Ramps
--Beadblasted finish on barrel
--Carbine length gas system
--1/2x28 threads
--Low-profile gas block pinned to barrel
--Gen III upper receiver featuring an anti-rotation interface with the handguard
--NSR-9 free floated handguard w/1913 top rail
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--BCM GunFighter Charging Handle w/Medium Latch
--KX3 flash suppressor,(US pat #7,836,809)
Noveske Gen III 10.5" CQB Switchblock Upper W/9.5" SB RAIL
Noveske Gen III 10.5" CQB SWITCHBLOCK Upper W/9.5" SB RAIL
List Price: $1,795.00
Our Price: $1,705.25
(Out of Stock)

Featuring:
--10.5" CQB stainless barrel with Switchblock Gas Block, 1 in 7" twist
--Noveske Gen III upper receiver
--5.56 Noveske Match Mod 0 chamber
--9.5" SB railed handguard with anti-rotation interface with the upper receiver
--Carbine length gas system
--Extended feed ramps
--1/2x28 TPI muzzle threads, 5.56mm
--AAC Advanced Armament Blackout 51T Flash Hider
--Bead blasted finish on barrel
--Auto bolt carrier
--Shot peened and MP tested bolt
--Vltor/BCM Medium Latch charging handle
--Medium Weight Contour


All NFA Regulations apply. Please check your local and state laws before ordering.
Contact your local ATF Field Office with any NFA questions you may have.
This is a complete upper, test fired, and ready to be installed on your complete lower.
Noveske 16" Recon SWITCHBLOCK W/11.5" SB RAIL
Noveske 16" Recon SWITCHBLOCK W/11.5" SB RAIL
List Price: $1,730.00
Our Price: $1,643.50
(Out of Stock)

Noveske 16" Recon 5.56mm Stainless Barrel, 1 in 7" twist polygonal rifling
Vltor/Noveske MUR Upper Receiver
1/2"x28 threads
Switchblock,(US pat #7,856,917), pinned to barrel
11.5" free floated SB handguard w/ 1913 rails
Shot peened and MP tested bolt
Auto carrier with properly staked carrier key
AAC 51T Blackout Flash Hider
Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch


Note: Upper receiver is slightly lighter color than the handguard as shown in upper receiver picture above.
Noveske 16" Recon W/MUR & 11" LO-PRO RAIL
Noveske 16" Recon W/MUR & 11" LO-PRO RAIL
List Price: $1,540.00
Our Price: $1,463.00
1 in stock!

Noveske 16" Recon 5.56mm Upper

Noveske 16" Recon 5.56mm Stainless Barrel, 1 in 7" twist polygonal rifling
1/2"x28 threads
Noveske 11" Lo-Pro Handguard
Vltor/Noveske MUR Upper Receiver
AAC Blackout Non-Mount Flash Hider
Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch
HP/MP Bolt
Noveske 16" Recon W/MUR & NSR-13.5
Noveske 16" 5.56mm Recon W/MUR & NSR-13.5" Handguard
List Price: $1,385.00
Our Price: $1,315.75
(Out of Stock)

Noveske 16" NSR Recon 5.56mm

Vltor/Noveske MUR Upper Receiver
Noveske 13.5" NSR Handguard
AAC Blackout Non-Mount Flash Hider
Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch
HP/MP Bolt

Includes One Pack of Noveske Keymod Handugard Panels
Noveske 18" SPR W/MUR & 14" LO-PRO RAIL
Noveske 18" SPR AR-15 Upper Receiver W/MUR & 14" LO-PRO RAIL
List Price: $1,516.45
Our Price: $1,440.63
(Out of Stock)

Noveske 18" SPR 5.56mm Upper

Noveske 18" SPR 5.56mm Stainless Barrel, 1 in 7" twist polygonal rifling
1/2"x28 threads
Noveske 14" Lo-Pro Handguard
Vltor/Noveske MUR Upper Receiver
AAC Blackout Non-Mount Flash Hider
Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch
HP/MP Bolt
Noveske 18" SPR AR-15 GEN III Upper Receiver W/NSR-13.5" Handguard
Noveske 18" SPR AR-15 GEN III Upper Receiver W/NSR-13.5" Handguard
List Price: $1,510.00
Our Price: $1,434.50
(Out of Stock)

Noveske 18" SPR 5.56mm Complete Upper Receiver
Vltor/Noveske GEN III Upper Receiver
Noveske 13.5" NSR Handguard
AAC Blackout Non-Mount Flash Hider
Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch
HP/MP Bolt
Includes One Pack of Noveske Keymod Handugard Panels
Noveske 7.5" DIPLOMAT W/MUR & 7" LO-PRO RAIL
Noveske 7.5" DIPLOMAT W/MUR & 7" LO-PRO RAIL
List Price: $1,451.65
Our Price: $1,379.07
(Out of Stock)

Noveske 7.5" Diplomat Upper Receiver, 5.56mm

7.5" Noveske Diplomat Barrel
Noveske KX3 Muzzle Device
Noveske 7" Lo-Pro Handguard
Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch
HP/MP Bolt, M16 Carrier
Noveske 7.5" DIPLOMAT W/MUR & NSR-7
Noveske 7.5" DIPLOMAT Upper W/MUR & NSR-7" Handguard
List Price: $1,267.89
Our Price: $1,204.50
(Out of Stock)

Noveske 7.5" NSR Recon Upper, 5.56mm

--7.5" Diplomat 5.56mm Stainless Barrel
--1 in 7" twist polygonal rifling
--Extended Feed Ramps
--Beadblasted finish on barrel
--1/2x28 threads
--Low-profile gas block pinned to barrel
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--NSR 7.5" free floated keymod handguard w/1913 top rail
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Noveske/Vltor (BCM Gunfighter) Charging Handle W/Medium Latch

Includes One Pack of Noveske Keymod Handugard Panels
Noveske- AR-15 Flattop Stripped CHAINSAW Upper Receiver With Extended Feed Ramps (M4)
Noveske- AR-15 Flattop Stripped CHAINSAW Upper Receiver With Extended Feed Ramps (M4)
List Price: $114.00
Our Price: $108.30
(Out of Stock)
(2)

Engraved with the Noveske chainsaw logo on the bottom of the forward assist area.  Uppers may have small blemishes or scratches but are 100% functional.
Noveske- AR-15 Flattop Stripped Upper Receiver With Extended Feed Ramps (M4)
Noveske- AR-15 Flattop Stripped Upper Receiver With Extended Feed Ramps (M4)
List Price: $120.00
Our Price: $114.00
(Out of Stock)
(3)

Noveske Rifleworks Stripped AR-15 Upper Recevier

Forged aluminum
Engraved with the Noveske iron cross above the forward assist
Hard coat anodized
Requires a forward assist assembly and ejection port cover assembly to complete
Upper does NOT have T numbers
Noveske- AR-15 Flattop CHAINSAW Upper Receiver With Extended Feed Ramps (M4)
Noveske- AR-15 Flattop CHAINSAW Upper Receiver With Extended Feed Ramps (M4)
List Price: $140.00
Our Price: $134.95
9 in stock!

Engraved with the Noveske chainsaw logo on the bottom of the forward assist area. Uppers may have small blemishes or scratches but are 100% functional. Includes forward assist and ejection port cover.

--Extended Feed Ramps
--Mil-spec anodized
--Iron Noveske Cross Imprint
--Forward assist and portdoor installed
--Mil-Std 1913 Top Rail

STAG ARMS MODEL 2H COMPLETE UPPER HALF, AR-15
Stag Arms Model 2H Complete Upper Half, AR-15
Our Price: $535.00
(Out of Stock)
(2)

Stag Arms Upper Halves come complete with bolt carrier assembly and charging handle.  Stag Arms Upper Halves are all factory test fired and zeroed.

-5.56 Nato Chamber
-Forged and Mil Spec.
-MI Rear Flip/Front Post
-16" Chrome Lined 1/9 Twist
-Front side sling swivel
-A2 flash suppressor
-M4 Handguards
STAG ARMS MODEL 1H COMPLETE UPPER HALF, AR-15
Stag Arms Model 1H Complete Upper Half, AR-15
Our Price: $545.00
1 in stock!
(2)

Stag Arms Upper Halves come complete with bolt carrier assembly and charging handle.  Stag Arms Upper Halves are all factory test fired and zeroed.

-5.56 Nato Chamber
-Forged and Mil Spec.
-Detachable Carry Handle/Front Post
-16" Chrome Lined 1/9 Twist
-Front side sling swivel
-A2 flash suppressor
-M4 Handguards
STAG ARMS MODEL 2HT COMPLETE UPPER HALF, AR-15
Stag Arms Model 2HT Complete Upper Half, AR-15
Our Price: $699.00
1 in stock!

Stag Arms Upper Halves come complete with bolt carrier assembly and charging handle.  Stag Arms Upper Halves are all factory test fired and zeroed.

-5.56 Nato Chamber
-Forged and Mil Spec.
-Free-Float 4 Rail Tactical Handguard
-A.R.M.S. 40L Rear Sight/Front Post
-16" Chrome Lined 1/9 Twist
-Front side sling swivel
-A2 flash suppressor
STAG ARMS MODEL 3H COMPLETE UPPER HALF, AR-15
Stag Arms Model 3H Complete Upper Half, AR-15
Our Price: $465.00
(Out of Stock)
(3)

Stag Arms Upper Halves come complete with bolt carrier assembly and charging handle.  Stag Arms Upper Halves are all factory test fired and zeroed.

-5.56 Nato Chamber
-Forged and Mil Spec.
-No Rear Sight/Railed Gas Block
-16" Chrome Lined 1/9 Twist
-A2 flash suppressor
-M4 Handguards
Stag Arms AR-15/M4 A3 Flat Top Upper Receiver Assembly
Stag Arms AR-15/M4 A3 Flat Top Upper Receiver Assembly
Our Price: $119.00
2 in stock!
(5)

Forged A3 flat top upper receiver assembly includes forward assist, ejection port dust cover.  Upper rail is T numbered.  Upper has M4 feed ramp cuts so the barrel being used must also have the proper cuts.
VLTOR AR-15 MODULAR UPPER RECEIVER, BOLT ASSIST
Vltor Modular Upper Receiver, W/Bolt Assist/Shell Deflector
List Price: $199.95
Our Price: $189.95
(Out of Stock)
(4)

The MUR was developed to give the customer a MilSpec correct upper receiver with a thicker wall making the MUR upper receiver a more rigid platform. A more rigid upper receiver will increase accuracy and reliability while extending the life of interfacing components such as the bolt carrier group and barrel assembly.
VLTOR AR-15 MODULAR UPPER RECEIVER SHELL DEFLECTOR
Vltor Modular Upper Receiver, W/Shell Deflector
List Price: $179.95
Our Price: $170.95
2 in stock!
(1)

The MUR was developed to give the customer a MilSpec correct upper receiver with a thicker wall making the MUR upper receiver a more rigid platform. A more rigid upper receiver will increase accuracy and reliability while extending the life of interfacing components such as the bolt carrier group and barrel assembly.
VLTOR AR-15 VIS CARBINE FORWARD ASSIST SHELL
Vltor VIS System Carbine Model With Forward Assist And Shell Deflector
List Price: $599.95
Our Price: $569.95
1 in stock!
(2)

One of the most innovative products available from Vltor is the Versatile Interface Structure (VIS) upper receiver assembly. After 12 years of concept, development and testing, the VIS integrated receiver and rail platform is now available.

The VIS is a polylithic upper receiver assembly that ties the normally individual receiver and handguard into an aggregate single part. This combination overcomes many problems that are associated with the traditional "two piece" design, most notably being greatly improved structural strength and repeatable accuracy; while affording the user the benefits of a free-floating barrel and rock solid railed fore end.

The VIS features four properly dimensioned Mil-Std-1913 Picatinny rails: The top rail is one continuous rail from the back of the receiver section, to the front of the VIS; the two side rails extend from the front portion of the receiver section, to the front of the VIS; and the bottom rail is attached to a removable lower section of the handguard portion. This removable lower section allows for the attachment of the M-203 grenade launcher, as well as assists in cleaning and maintenance.

The manufacturing process of the VIS is unique...starting with what is essentially a traditional separate upper receiver and handguard, these parts are partially machined then permanently joined using an exclusive welding process - this composite unit is then stress relieved, final machined and heat treated. This innovative process allows the VIS to accept any standard AR barrel! The only thing that is changed is the barrel nut used with the VIS, the required barrel nut and wrench is included with each VIS kit.

Another Vltor exclusive is the modular shell deflector and bolt assist assembly. The VIS gives the operator the opportunity to choose between a shell deflector/bolt assist combo or a shell deflector only.

While the VIS is not the first one piece upper receiver for the AR-15/M16 family, it is the first design that retains the use of standard barrels, as well as a removable bottom rail section that allows the mounting of the M-203 grenade launcher and all SOPMOD components.
VLTOR AR-15 VIS CARBINE SHELL DEFLECTOR ONLY
Vltor VIS System Carbine Model With Shell Deflector Only
List Price: $574.94
Our Price: $546.20
1 in stock!
(1)

One of the most innovative products available from Vltor is the Versatile Interface Structure (VIS) upper receiver assembly. After 12 years of concept, development and testing, the VIS integrated receiver and rail platform is now available.

The VIS is a polylithic upper receiver assembly that ties the normally individual receiver and handguard into an aggregate single part. This combination overcomes many problems that are associated with the traditional "two piece" design, most notably being greatly improved structural strength and repeatable accuracy; while affording the user the benefits of a free-floating barrel and rock solid railed fore end.

The VIS features four properly dimensioned Mil-Std-1913 Picatinny rails: The top rail is one continuous rail from the back of the receiver section, to the front of the VIS; the two side rails extend from the front portion of the receiver section, to the front of the VIS; and the bottom rail is attached to a removable lower section of the handguard portion. This removable lower section allows for the attachment of the M-203 grenade launcher, as well as assists in cleaning and maintenance.

The manufacturing process of the VIS is unique...starting with what is essentially a traditional separate upper receiver and handguard, these parts are partially machined then permanently joined using an exclusive welding process - this composite unit is then stress relieved, final machined and heat treated. This innovative process allows the VIS to accept any standard AR barrel! The only thing that is changed is the barrel nut used with the VIS, the required barrel nut and wrench is included with each VIS kit.

Another Vltor exclusive is the modular shell deflector and bolt assist assembly. The VIS gives the operator the opportunity to choose between a shell deflector/bolt assist combo or a shell deflector only.

While the VIS is not the first one piece upper receiver for the AR-15/M16 family, it is the first design that retains the use of standard barrels, as well as a removable bottom rail section that allows the mounting of the M-203 grenade launcher and all SOPMOD components.
VLTOR AR-15 VIS MID-LENGTH BOLT ASSIST SHELL
Vltor Versatile Interface System, Mid-Length W/Bolt Assist/Shell Deflector
List Price: $629.95
Our Price: $598.45
(Out of Stock)

One of the most innovative products available from Vltor is the Versatile Interface Structure (VIS) upper receiver assembly. After 12 years of concept, development and testing, the VIS integrated receiver and rail platform is now available.

The VIS is a polylithic upper receiver assembly that ties the normally individual receiver and handguard into an aggregate single part. This combination overcomes many problems that are associated with the traditional "two piece" design, most notably being greatly improved structural strength and repeatable accuracy; while affording the user the benefits of a free-floating barrel and rock solid railed fore end.

The VIS features four properly dimensioned Mil-Std-1913 Picatinny rails: The top rail is one continuous rail from the back of the receiver section, to the front of the VIS; the two side rails extend from the front portion of the receiver section, to the front of the VIS; and the bottom rail is attached to a removable lower section of the handguard portion. This removable lower section allows for the attachment of the M-203 grenade launcher, as well as assists in cleaning and maintenance.

The manufacturing process of the VIS is unique...starting with what is essentially a traditional separate upper receiver and handguard, these parts are partially machined then permanently joined using an exclusive welding process - this composite unit is then stress relieved, final machined and heat treated. This innovative process allows the VIS to accept any standard AR barrel! The only thing that is changed is the barrel nut used with the VIS, the required barrel nut and wrench is included with each VIS kit.

Another Vltor exclusive is the modular shell deflector and bolt assist assembly. The VIS gives the operator the opportunity to choose between a shell deflector/bolt assist combo or a shell deflector only.

While the VIS is not the first one piece upper receiver for the AR-15/M16 family, it is the first design that retains the use of standard barrels, as well as a removable bottom rail section that allows the mounting of the M-203 grenade launcher and all SOPMOD components.
VLTOR AR-15 VIS MID-LENGTH SHELL DEFLECTOR ONLY
Vltor Versitile Interface System, Mid-Length W/Shell Deflector
List Price: $604.95
Our Price: $574.70
(Out of Stock)

One of the most innovative products available from Vltor is the Versatile Interface Structure (VIS) upper receiver assembly. After 12 years of concept, development and testing, the VIS integrated receiver and rail platform is now available.

The VIS is a polylithic upper receiver assembly that ties the normally individual receiver and handguard into an aggregate single part. This combination overcomes many problems that are associated with the traditional "two piece" design, most notably being greatly improved structural strength and repeatable accuracy; while affording the user the benefits of a free-floating barrel and rock solid railed fore end.

The VIS features four properly dimensioned Mil-Std-1913 Picatinny rails: The top rail is one continuous rail from the back of the receiver section, to the front of the VIS; the two side rails extend from the front portion of the receiver section, to the front of the VIS; and the bottom rail is attached to a removable lower section of the handguard portion. This removable lower section allows for the attachment of the M-203 grenade launcher, as well as assists in cleaning and maintenance.

The manufacturing process of the VIS is unique...starting with what is essentially a traditional separate upper receiver and handguard, these parts are partially machined then permanently joined using an exclusive welding process - this composite unit is then stress relieved, final machined and heat treated. This innovative process allows the VIS to accept any standard AR barrel! The only thing that is changed is the barrel nut used with the VIS, the required barrel nut and wrench is included with each VIS kit.

Another Vltor exclusive is the modular shell deflector and bolt assist assembly. The VIS gives the operator the opportunity to choose between a shell deflector/bolt assist combo or a shell deflector only.

While the VIS is not the first one piece upper receiver for the AR-15/M16 family, it is the first design that retains the use of standard barrels, as well as a removable bottom rail section that allows the mounting of the M-203 grenade launcher and all SOPMOD components.
VLTOR AR15 VIS RIFLE LENGTH BOLT ASSIST SHELL
Vltor Versatile Interface System, Rifle Length W/Bolt Assist/Shell Deflector
List Price: $679.95
Our Price: $645.95
(Out of Stock)
(2)

One of the most innovative products available from Vltor is the Versatile Interface Structure (VIS) upper receiver assembly. After 12 years of concept, development and testing, the VIS integrated receiver and rail platform is now available.

The VIS is a polylithic upper receiver assembly that ties the normally individual receiver and handguard into an aggregate single part. This combination overcomes many problems that are associated with the traditional "two piece" design, most notably being greatly improved structural strength and repeatable accuracy; while affording the user the benefits of a free-floating barrel and rock solid railed fore end.

The VIS features four properly dimensioned Mil-Std-1913 Picatinny rails: The top rail is one continuous rail from the back of the receiver section, to the front of the VIS; the two side rails extend from the front portion of the receiver section, to the front of the VIS; and the bottom rail is attached to a removable lower section of the handguard portion. This removable lower section allows for the attachment of the M-203 grenade launcher, as well as assists in cleaning and maintenance.

The manufacturing process of the VIS is unique...starting with what is essentially a traditional separate upper receiver and handguard, these parts are partially machined then permanently joined using an exclusive welding process - this composite unit is then stress relieved, final machined and heat treated. This innovative process allows the VIS to accept any standard AR barrel! The only thing that is changed is the barrel nut used with the VIS, the required barrel nut and wrench is included with each VIS kit.

Another Vltor exclusive is the modular shell deflector and bolt assist assembly. The VIS gives the operator the opportunity to choose between a shell deflector/bolt assist combo or a shell deflector only.

While the VIS is not the first one piece upper receiver for the AR-15/M16 family, it is the first design that retains the use of standard barrels, as well as a removable bottom rail section that allows the mounting of the M-203 grenade launcher and all SOPMOD components.
VLTOR AR-15 VIS RIFLE LENGTH SHELL DEFLECTOR ONLY
Vltor Versitile Interface System, Rifle Length W/Shell Deflector
List Price: $654.95
Our Price: $622.20
(Out of Stock)
(1)

One of the most innovative products available from Vltor is the Versatile Interface Structure (VIS) upper receiver assembly. After 12 years of concept, development and testing, the VIS integrated receiver and rail platform is now available.

The VIS is a polylithic upper receiver assembly that ties the normally individual receiver and handguard into an aggregate single part. This combination overcomes many problems that are associated with the traditional "two piece" design, most notably being greatly improved structural strength and repeatable accuracy; while affording the user the benefits of a free-floating barrel and rock solid railed fore end.

The VIS features four properly dimensioned Mil-Std-1913 Picatinny rails: The top rail is one continuous rail from the back of the receiver section, to the front of the VIS; the two side rails extend from the front portion of the receiver section, to the front of the VIS; and the bottom rail is attached to a removable lower section of the handguard portion. This removable lower section allows for the attachment of the M-203 grenade launcher, as well as assists in cleaning and maintenance.

The manufacturing process of the VIS is unique...starting with what is essentially a traditional separate upper receiver and handguard, these parts are partially machined then permanently joined using an exclusive welding process - this composite unit is then stress relieved, final machined and heat treated. This innovative process allows the VIS to accept any standard AR barrel! The only thing that is changed is the barrel nut used with the VIS, the required barrel nut and wrench is included with each VIS kit.

Another Vltor exclusive is the modular shell deflector and bolt assist assembly. The VIS gives the operator the opportunity to choose between a shell deflector/bolt assist combo or a shell deflector only.

While the VIS is not the first one piece upper receiver for the AR-15/M16 family, it is the first design that retains the use of standard barrels, as well as a removable bottom rail section that allows the mounting of the M-203 grenade launcher and all SOPMOD components.
VLTOR VIS Extended Mid-Length, 10-inch
VLTOR VIS Extended Mid-Length, 10-Inch
List Price: $649.95
Our Price: $617.45
1 in stock!
(1)

VLTOR VIS Extended Mid-Length, 10-inch
Vltor VIS Extended Mid-Length, 10-inch
Vltor VIS Extended Mid-Length, 10-Inch
List Price: $624.95
Our Price: $593.70
(Out of Stock)

Extended Mid-Length, 10-inch
   
 
Operation Parts
PO Box 52
Linden, MI 48451 USA
P: (810) 513-5093
F: (866) 796-5182

 About Us
 Return Policy
 Privacy Policy
 e-Mail Us
 
Company Info | Product Index | Category Index | Help | Terms of Use
Copyright © 2003-2013 Operation Parts. All Rights Reserved.
Built with Volusion