|
|
|
|
|
|
Brownells AR15 Front Sight Bench Block Tool
|
|
Our Price: $39.99
5 in stock!
|
|
|
Two Working Sides For Installation & Removal
Big, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec, AR-15 rifles and carbines. Precision-machined and clearly marked on both sides for driving the mounting pins “IN“ or "OUT" of the sight. Accommodates the sling swivel, plus, includes provisions for removing the gas tube roll pin.
SPECS: Polyethylene, orange. 4" (10.2cm) dia. x 1-11/16" (4.3cm) high.
|
|
|
|
|
|
|
|
|
|
Brownells AR15/M16 Combination Wrench
|
|
Our Price: $34.97
2 in stock!
|
|
|
Original Factory Design Simplifies Disassembly/Reassembly
An exact duplicate of the original factory/military design so you know it will fit and work. Use for several jobs: to remove the barrel nut; to remove and install old and new flash suppressors; to remove and install the lower receiver extension.
SPECS: Blued steel. 5" (12.7cm) long x 2" (5cm) wide x 1/4" (6.35mm) thick.
|
|
|
|
|
|
|
|
|
|
Brownells .223/5.56 Broken Shell Extractor
|
|
Our Price: $19.95
2 in stock!
|
|
|
Easily Removes Broken Cases Without Field Stripping
|
|
|
|
|
|
|
|
|
|
Brownells AR-15/M16/AR-Style Handguard Removal Tool
|
|
Our Price: $19.99
2 in stock!
|
|
|
Makes Taking The AR-15/M16 Handguard Off Fast, Easy & Painless
|
|
|
|
|
|
|
|
|
|
Brownells AR-15/M16 Upper Receiver Action Block
|
|
Our Price: $59.99
5 in stock!
|
|
|
Protect Receiver From Damage When Clamping
|
|
|
|
|
|
|
|
|
|
Brownells AR-15/M16 Upper Receiver Action Block And Lower Receiver Vise Block Set
|
|
Our Price: $79.99
6 in stock!
|
|
|
BROWNELLS AR-15/M16 UPPER RECEIVER ACTION BLOCK AND LOWER RECEIVER VISE BLOCK SET
|
|
|
|
|
|
|
|
|
|
Brownells AR-15/M16 Sight Adjustment Wrench
|
|
Our Price: $8.99
(Out of Stock)
|
|
|
Model For A2 Make Sight Adjusting Quick & Easy
Even though you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy.
|
|
|
|
|
|
|
|
|
|
SINCLAIR INTERNATIONAL - AR-15 CLEANING LINK
|
|
Our Price: $15.99
5 in stock!
|
|
|
Locks AR-15 Open For Fast, Easy Cleaning
Lets you easily clean and lube the action or swab out barrel, from the breech. Hold-open link separates upper and lower receiver assemblies, locks them solid, prevents the receiver from constantly flopping closed. Stainless steel and Delrin® link installs in seconds, is impervious to solvents.
SPECS: Delrin and stainless steel.
|
|
|
|
|
|
|
|
|
|
DANIEL DEFENSE AR-15/M4 LITE RAIL/RIS II BARREL NUT WRENCH
|
|
List Price: $11.00
Our Price: $10.00
1 in stock!
|
|
|
The Bolt Up System Barrel Nut Wrench is a proprietary spanner wrench required to install our AR15 Lite Rail and RIS II Rail System. This wrench is designed to be used with a 1⁄2 Drive Torque Wrench
|
|
|
|
|
|
|
|
|
|
Brownells DPMS AR-10 Style .308 Free Float Handguard Barrel Nut Wrench
|
|
Our Price: $54.99
(Out of Stock)
|
|
|
Rugged, No-Fail Wrench Removes & Installs Barrel Nut on Free Float Forearms
No-fail armorer’s tool allows precise, but easy installation and removal of free float handguard barrel nuts when installing and removing barrels. Dual-ended design works for both the LR-Series (.308, .260, .243) rifles from DPMS, plus the AR-10 (.308 current design) from ArmaLite, Inc. Made from solid steel with hardened steel pins, plus convenient, dual square cutouts to get additional leverage with a ½" drive breaker bar.
SPECS: Steel, blue. 9” (22cm) long, 1¼” (3.1cm) wide handle, 3⁄8" (9.5mm) thick. Fits DPMS LR-Series (.308, .260, .243), AR-10
Only works with free float handguard barrel nuts, will not work with the standard barrel nut.
Will not work with Knight's Armament SR-25!
|
|
|
|
|
|
|
|
|
|
Brownell's DPMS AR-15 Multi-Tool
|
|
Our Price: $41.99
2 in stock!
|
|
|
Seven Function Tool Lets You Build & Repair AR-15's
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament SR-25 Barrel Nut Wrench
|
|
List Price: $285.29
Our Price: $276.73
1 in stock!
|
|
|
Knight's Armament SR-25 armorer barrel nut wrench for standard fiberglass handguards and RAS removal/installation.
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament URX Vice Jaw
|
|
Our Price: $307.25
(Out of Stock)
|
|
|
Aligns and holds URX and upper receiver in line and allow for them to be clamped in a vice for barrel nut torquing.
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament SR25 URX Barrel Nut Wrench
|
|
Our Price: $278.05
(Out of Stock)
|
|
|
Barrel nut wrench required to install the Knight's Armament URX onto an SR25. Wrench is used in conjunction with a standard AR-15 barrel nut wrench. We also offer installation under our Shop Services, Labor category.
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament SR15 URX Barrel Nut Wrench For Old Style Castle Nut
|
|
Our Price: $278.05
(Out of Stock)
|
|
|
Knight's Armament URX barrel nut wrench is required for installation or removal of SR15/AR15 (5.56mm) URX rails with castle type barrel nut. Wrench is used in conjunction with a standard AR-15 barrel nut wrench. We also offer installation under our Shop Services, Labor category.
*Does not fit the newer style scalloped barrel nut that now comes with the URX.
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament URX Barrel Nut Wrench, New Style For SR-15 URX
|
|
List Price: $116.25
Our Price: $113.93
(Out of Stock)
|
|
|
Barrel nut wrench required for installation of SR-15 URX's with the new style barrel nut.
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament SR-25 7.62 Carbine Cleaning Kit
|
|
List Price: $366.18
Our Price: $358.86
(Out of Stock)
|
|
|
Knight's Armament SR-25 Detailed Soft Cleaning Kit w/ SR-25/MK11 Field Repair Kit (Includes CLP, TW-25B, and Shooters Choice plus Tipton Carbon Fiber Cleaning Rod)
Includes:
|
|
|
|
|
|
|
|
|
|
KAC-Knight's Armament Barrel Extension Wrench for Muzzle Device Work (5.56/7.62)
|
|
List Price: $81.25
Our Price: $79.63
(Out of Stock)
|
|
|
Knight's Armament Barrel Extension Wrench used for holding the barrel extension on 5.56/7.62 caliber barrels while torquing or removing muzzle devices.
|
|
|
|
|
|
|
|
|
|
Rail Vise Assembly For AR-15 Cleaning and Maintenance
|
|
Our Price: $80.00
(Out of Stock)
|
|
|
With the creation of the Rail Vise, is is now possible to hold the AR-15 rifle in a secure, “rock solid” position resulting in total access to those areas of the rifle that require detailed cleaning.
The Rail Vise clamps on the Picatinny rail (MIL-STD-1913) to hold the rifle in a secure and stable manner. In the photos you can see the Rail Vise being used to hold the Upper Receiver by the rail and the Lower Receiver by using the Mag Well Adapter.
|
|
|
|
|
|
|
|
|
|
RRA-Rock River Arms Tactical Car Stock Wrench, Rock River Arms
|
|
Our Price: $6.00
2 in stock!
|
|
|
Product description coming soon!
|
|
|
|
|
|
|
|
|
|
Smith Enterprise AR-15/M16 Armorers Wrench
|
|
Our Price: $49.95
(Out of Stock)
|
|
|
Extra-heavy duty armorers wrench provides easier installation and removal of all barrels up to 1¼" diameter with either encapsulated or peg-style barrel nuts. Extra-long handle features smooth, contoured edges for comfortable use. Includes ½" square drive opening for torque wrench application; 5⁄8" and ¾" slots fit receiver extensions and A1/A2 flash suppressors.
SPECS: 17-4 stainless steel, black oxide finish. 12" (30cm) long, 1" (2.5cm) wide handle.
|
|
|
|
|
|
|
|
|
|
YHM-Yankee Hill Machine Forearm Wrench
|
|
List Price: $33.50
Our Price: $30.15
3 in stock!
|
|
|
This handy tool allows for the easy removal and installation of YHM’s forearms. Incorporated into the design is a tool for tightening the barrel nut and a spanner wrench for tightening the jam nut. Made from quality hardened steel and black oxide plated.
|
|
|
|
|
|
|
|
|
|
YHM-Yankee Hill Machine Picatinny Vice Jaws
|
|
List Price: $82.50
Our Price: $74.25
(Out of Stock)
|
|
|
These jaws simply drop into your vice and provide a solid clamping surface on any picatinny rail. They're perfect for guaranteed alignment between your upper receiver and our free-float handguards.
|
|
|
|
