View CartMy Account / Order StatusHelp






(Your shopping cart is empty)

  Home > Lowers, Parts, Grips, Accessories >

  ALG Defense ALG Combat Trigger (ACT) Trigger, Small Pin

ALG Defense ALG Combat Trigger (ACT) Trigger, Small Pin
ALG Defense ALG Combat Trigger (ACT) Trigger, Small Pin


 
Quantity Listed Below Is Updated Every Second.
Our Price: $65.00

Quantity in Stock:5
Part Number: ACT
Qty:

Description
 
The ALG Defense ALG Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns
are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the
grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. The pull weight
is not lower than the M4/M16 minimum weight specification of 5.5lbs.


1. Performance Advantages for the Shooter:

The ALG Defense ACT trigger pull is smoother and
sharper than a stock trigger. This is accomplished by
polishing the sear surfaces smooth and HardLubing the
trigger components.
Sear geometry has not been changed from the
standard profile so the high reliability that the stock trigger
is known for is unchanged.
Trigger and hammer are made from true 8620 alloy
steel military specification castings, correctly carburized,
quenched and tempered for high surface hardness.
Disconnector is 1070 High Carbon steel properly
Austempered into the spring range of hardness.
Springs are corrosion resistant and meet military
specifications.
A full force hammer spring is used for positive ignition
of all type of ammunition.
Trigger and hammer pins are improved over stock mild
steel by using 4140 Chrome-Moly steel that has been
quenched and tempered. Pins are centerless ground to
a fine finish and a diameter 0.001 larger than stock to
reduce play in the trigger assembly while retaining a slip fit
into the weapon lower receiver. Both pins are Nickel-Teflon
coated.
Pull weight is above the U.S. Military minimum pull
weight of 5.5lbs but does not reach near the upper limit of
9.5lbs. Generally, the pull weight is about 6.0lbs.

2. Advantages for the Armorer:

The ALG Defense ACT trigger is an enhanced
standard trigger so maintenance and installation procedures
are unchanged.
Trigger assembly parts may be interchanged betweentriggers, there are no matched sets.
As a trigger meeting the essential U.S. Military
trigger specifications for the M4 Carbine, the ALG Defense
ACT can be substituted for lower performing stock triggers
while still staying in compliance with Unit or Departmental
requirements.

Note about HardLubing:

HardLubing is ALG's term for electroless Nickel plating with
an integral modifier to the base nickel plate. Either Boron
or Teflon is used to enhance surface hardness, wear
resistance and corrosion resistance and also create
favorable tribological properties of the trigger components.
Testing has shown that differential coating of the
trigger parts contributes to the sharpness of the ACT's
single stage pull. The trigger component is plated with
Nickel-Boron which has a high surface hardness combined
with excellent wear resistance. The color is a pleasing
matte light grey that may be painted on non-functional
surfaces if the shooter so desires (such as the trigger bow
that is visible outside the lower receiver). The hammer,
disconnector and trigger/hammer pins are plated with
Nickel-Teflon which combines a low coefficient of friction
with good wear resistance. The Teflon impregnation colors
the metal a mottled, greyish/green. Parts coated with
Nickel-Teflon cannot be painted. Both coatings are highly
corrosion resistant eliminating the oil seal of traditional
phosphated firearm components.


Average Customer Review: 4.5 of 5 | Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Great trigger but not much better than QMS April 25, 2013
Reviewer: Stan Winston from Pasadena, TX United States  
It looks pretty...  I'm a Geissele nut, but decided to try the QMS and ACT in some builds and honestly they feel exactly the same.  I can't see a reason to pay $20 more unless you just have to have a silver colored trigger.  Some of the QMS units I purchased actually had a smoother, shorter pull and reset than the ACTs.  Still... they look nice and are a great deal.  If you're still using a mil-spec trigger, do yourself a favor and at least buy this or the QMS.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Product, Outstanding Service! April 23, 2013
Reviewer: JD from Shreveport, LA United States  
Your service was outstanding!  Less than three days after ordering (on a Saturday), the package arrived at my doorstep.  And the trigger is excellent; no slop, really smooth, and extremely well-finished.  This trigger is a significant improvement over my stock trigger.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
excellent August 11, 2012
Reviewer: r.r. from FL United States  
Smooth and lighter than the finest stock mil trigger. Pins fit beautifully. Will buy more.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
agl trigger April 5, 2012
Reviewer: joe stromski from racine, WI United States  
experience with company great..... trigger looks great not sure it was worth money though not much of a difference over stock trigger

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good customer Service, Fast Shipment March 30, 2012
Reviewer: Thomas Rigsbee from Woodbridge, VA United States  
Ordered the AGL trigger groups and had a question concerning the pins.  Had my answer by email in a very short period.  Ordered the trigger groups and they were shipped and received in four days.  Good folks to do business with and kept me informed all the way.  Thanks!

Was this review helpful to you?


Browse for more products in the same category as this item:

Lowers, Parts, Grips, Accessories
Lowers, Parts, Grips, Accessories > Lower Accessories
Lowers, Parts, Grips, Accessories > Lower Parts
Operation Parts
PO Box 52
Linden, MI 48451 USA
P: (810) 513-5093
F: (866) 796-5182

 About Us
 Return Policy
 Privacy Policy
 e-Mail Us
 
Company Info | Product Index | Category Index | Help | Terms of Use
Copyright © 2003-2013 Operation Parts. All Rights Reserved.
Built with Volusion